Our company developed a thin switch where the button part of panel was able to rise. Thin haptic switch that rose partially was impossible so far.
It became possible because it made it to the bimorph structure by using the electro-conductive polymer actuator.
The thickness of our haptic switch is very thin with about 0.3mm.
As a result, use to cellular phone, PDA, and the notebook computer, etc. became possible.

1) Type A
※When the voltage is applied by ±1.5V, the displacement is ±0.5mm.

2) Type B
※When the voltage is applied by ±1.5V, the displacement is ±0.5mm.

3) Type C
※When the voltage is applied by ±1.5V, the displacement is ±0.5mm.

4) Type D
※When the voltage is applied by ±1.5V, the displacement is ±0.2mm.